Metković, residential and commercial building, new construction

RESIDENTIAL - BUSINESS BUILDING in Metković TECHNICAL DESCRIPTION:

Residential and commercial building, it was designed as a free-standing building with three expansions: D1, D2, D3, floors P+4+Pk, i.e.: ground floor, four floors and an attic:

ground floor - 2 business spaces and 36 storage rooms

first floor - apartments

second floor - apartments

third floor - apartments

fourth floor - apartments attic - apartments

There are 58 parking spaces on the lot, part for residential units, part for business premises. On the ground floor of the building there are 2 business spaces for the needs of the service industry and 36 storage rooms for the needs of the tenants. Communication between floors is achieved through an internal staircase through all floors. Every residential development has an elevator that goes through all floors - from the ground floor to the attic.

The load-bearing part of the structure consists of ab walls, columns, beams, flat mezzanine ab panels and sloping roof ab panels. The load-bearing walls are 25 and 20 cm thick, the thickness of the flat slab is 20 cm, and the thickness of the sloping roof slabs is 18 cm.

The foundation of the building will be constructed as a reinforced concrete base plate with a thickness of 50 cm.

Partition walls are partly made of ytong elements with a thickness of 10 - 12 cm, and partly of gypsum - cardboard thickness. 10 and 12 cm.

All reinforced concrete and structural elements, such as horizontal, vertical and inclined anti-seismic cerclages, lintels, beams, stairs, slabs and others, are made of reinforced concrete of the brand and reinforcement according to the static calculation.

The facades of the building are treated with a demit facade and a final layer in the tone of the investor's choice with the approval of the designer.

All interior walls of the rooms, depending on the construction, are smoothed, that is, plastered and painted with dispersive white paint.

Walls covered with ceramic tiles are plastered with cement mortar.

The ceilings are smoothed, and after smoothing and other preparatory work, they are painted with dispersive white paint.

The walls in the bathrooms are covered with ceramic tiles (glazed) up to the height of the doorframe, and in the kitchen between the kitchen elements (height approx. 60 cm). Ceramic floor tiles are laid on the bathroom floors. On the loggia and balcony floors, ceramic tiles are also installed in cement glue, as long as they are unglazed (non-slip). All ceramic tiles are first class.

Finished three-layer oak parquet d=1.40 cm, width 10-15 cm (one slat) is laid on the floors of the rooms and the living room.

Treads and stair heads are covered with stone. The treads are 2 cm thick, the fronts are 2 cm and are laid in cement mortar 1:3.

The external openings will be constructed as PVC positions glazed with 3-layer iso glass, and there is a sliding shutter on the facade.

The entrance doors in the apartments are anti-burglary, fire-resistant T-30.

The internal doors are wooden, with smooth wings, with a drywall doorframe, height 210 cm.

In the building, the installation of water supply and sewerage, installation of strong and weak current, telephone installation, antenna device, lightning protection installation, internal voice device, ventilation installation, elevator and internal and external air conditioning device will be carried out, all according to current regulations.

For all other information on request.