The building consists of a total of 17 residential units. The apartments are designed from four-room to six-room, two-sided orientation. The core of the building is formed by two staircases with an elevator, from which one enters the apartments. On the floors from the 1st to the 4th floor there are a total of 4 apartments on the floor, according to the principle of two apartments per staircase. On the 5th floor is a larger apartment.

The apartments are similarly designed: living rooms and dining areas with access to loggias have been placed on the street facade.

CONSTRUCTION: 90 cm thick reinforced concrete slab, 20, 25 and 30 cm thick load-bearing reinforced concrete load-bearing walls, 22-25 cm thick reinforced concrete mezzanine slabs, 12.5 cm thick gypsum plasterboard partition walls..

FACADE: The street side of the facade is made as a double element of the facade type KFK DS-MG with additional external glass. Screen roller shutter between outer and inner glass. The courtyard side of the facade is made of sheet metal ventilated facade.

EXTERIOR JOINERY: Wood-aluminum (outside aluminum as protection of wood from atmospheric conditions, inside wood oak protected with stain varnish), IZO three-layer glass. All loggias are protected by aluminum sliding shutters.

JOINERY: Entrance door to the apartment in anti-burglary and fire-fighting design (fire resistance 30 minutes, anti-burglary class 3, soundproof), interior carpentry , exterior carpentry aluminum profiles system Schucco AWS 75

WALLS: Ceramic tiles of the first class of Italian manufacturers in sanitary facilities.

BATHROOMS AND TOILETS: Bathroom equipment from renowned manufacturers with high quality bathtubs, walk in shower with lamistal clear glass partition and aluminum profiles, and other bathroom equipment, toilet bowls and bidet console type with soft close lowering board (manufacturers Laufen).

ELECTRICAL INSTALLATIONS: The electricity meter is located in the central electrical room intended for apartment meters located on the ground floor, central power switch in the apartment, all rooms have telephone and TV sockets.

INSTALLATION OF WATER SUPPLY AND SEWERAGE: Impulse water meters are provided for each apartment in special water meter cabinets in the hallway of the staircase. Plumbing installations were performed using PEX pipes. The main water valve in each apartment.

HEATING AND HOT WATER: Underfloor surface heating is provided for heating each apartment. Bathrooms are provided for additional heatingbathroom radiators - ladders. For cooling the permanent living room (living room, dining room and bedroom), fan coils are provided for installation in the suspended ceiling.

Crestron smart home system - smart control of lighting, shutters and heating and cooling.

Three bedroom apartment with a total net area of 127.80 m2 located on the 4th floor.

It consists of a hall, kitchen, dining room, living room, 3 bedrooms, 2 bathrooms, hallway, wardrobe and loggia.